I had a look and the shaft diameter of the bolt that runs horizontally
through the rubber mounts is approx 10mm.

alistair

on 1/1/2001 3:42 PM, Carolyn Kitzmann at kitzmann@EXIS.NET wrote:

>
> Second question.  In the mess of the conversion I can't locate the bolts
> that went through the engine mounts.  A 10 mm bolt slides in easily and has
> some wiggle room, but a 12mm doesn't go in at all and looks to be only
> slightly larger then the hole.  If someone could look and see if the bolts
> are 10mm or something else would be appreciated.
>
> Thanks,
> Dave
>
> 82 Vanagon Diesel, soon to be Golf powered
>