

| Subject: | Re: Help! Appeal for data |
| From: | Karl Wolz |
| Date: | Thu, 11 Jan 2001 17:19:34 -0700 |
BTDT. My '85GL Westy will blink, but the temp indicator will NOT rise. On my '84 non-GL 7 passenger, the temperature indicator will rise along with the light blinking. I believe the difference is the speedo/tach type of instrument panel which is (I believe) normal in the GL version. On the other hand, I have four fingers and a thumb. Karl Wolz ----- Original Message ----- From: "David Beierl" <dbeierl@ATTGLOBAL.NET> To: <vanagon@GERRY.VANAGON.COM> Sent: Thursday, January 11, 2001 12:35 PM Subject: Help! Appeal for data > Volks, I've got some conflicting data concerning the low-coolant warning > and could use help sorting it out. Briefly (briefly? me?) the Bentley > wiring diagram for all years indicates that there are only three terminals > on the temp gauge/blinker assy -- +10v, ground, and sender; and that the > low-coolant circuit operates by grounding the sender lead, thus simulating > an overtemp condition (so the gauge goes offscale and the light > blinks). This is how my '85 and '85 behave. > > HOWEVER, I've gotten reports in the past that some V'gons only blink the > light under these conditions and the gauge does not rise. > > I'd very much appreciate it if a whole bunch of you would go out, turn on > your ignition and wait until the light stops blinking, then unplug the > low-coolant sensor and tell me what happens. What I expect to happen is > that the light instantly starts blinking, then the needle rises and goes > offscale over say ten seconds or so. When you plug the sender back in the > gauge soon starts to fall; the light blinks for another ten seconds or so > and shuts off. > > Please let me know the year of your V'gon and how your results compare with > what I've just described. > > thanks > david > > > David Beierl - Providence, RI > http://pws.prserv.net/synergy/Vanagon/ > '84 Westy "Dutiful Passage" > '85 GL "Poor Relation" >
Have something to add on this topic today? Revive this thread in the forum »