I know that Snap-On and Matco make 'em.  I'm not sure how non-mechanics
purchase snap-on though, I bought mine off the truck during my short stint
as a VW Tech.  HTH.

Cory
Desperately Seeking a Syncro Westy

> I went out and bought a 17 mm allen wrench, and although it is the
> proper diameter, the wrench is too physically large to fit t he drain
> plug because the (stock) 'exhaust pipes are too close.  I also
> unsuccessfully looked into buying a 17 mm allen socket (said the don't
> have 'em).  Does anyone know of something off-the-shelf that I can buy?
> Otherwise I'm going to have to find someone with a welder to do the
> tricks mentioned earlier.
>
> >I took a bolt with a 17 mm head and welded it into an expendable
> >half-inch drive socket using high strength welding rod.
> >You might be able to put a 17 mm nut part way into the plug and turn
> >it with a socket.
>
> > > What size allen wrench is required to remove the filler plug on a
> > > 4sp manual tranny for an '85 GL?
> > > thanks
>
>
>
>
> __________________________________________________
> Do You Yahoo!?
> Get email at your own domain with Yahoo! Mail.
> http://personal.mail.yahoo.com/