Skip to main content
Gerry | Vanagon
Checking account...
← vanagon.com home · Continue the discussion in the forum
Subject:Re: allen wrench for gear oil change
From:Rico Sapolich
Date:Sat, 13 Jan 2001 22:59:55 EST
In a message dated 1/13/01 9:18:16 PM, pgilland@YAHOO.COM writes:

<< the wrench is too physically large to fit t he drain
plug because the (stock) 'exhaust pipes are too close. >>

Paul,

If you cut off about 1 inch of the Allen key with an abrasive cutoff wheel,
you can insert that into the socket of the drain plug and turn it with a 17mm
box wrench.

Rich