

| Subject: | Re: Ground wire from heater blower warm |
| From: | David Beierl |
| Date: | Mon, 15 Jan 2001 17:05:48 -0500 |
At 04:29 PM 1/15/2001, Ken Hunter wrote: >The heater blower motor on my 82 Westy draws my system voltage down from >13.9V to 10.9V when running at high speed according to my VDO volt meter and >my handheld VOM. Depends where you're measuring the system voltage -- but that's an awful high drop, even right at the blower. Trace the supply lines back until you find where that drop is occurring. Might save yourself a fire or melted wiring. >I thought that I might have a poor connection at the ground >termination clusters under the dash so i pulled the fuse panel down out of >the way to have a look. I noticed that the ground connection from the blower >was warm to the touch and would even spark when I reatatched it. Poor ground would get warm/hot, must fix. This does *NOT* however account for the blower drawing down the system. Sparking is normal. If the motor were drawing too much the whole wire would be warm (and the fuse would blow -- you did take off the tinfoil, right?). >Does this >sound like a short in the motor itself? I'm stumped. Probably not, but you can measure -- the motor draws just about twelve amps at high speed. david David Beierl - Providence, RI http://pws.prserv.net/synergy/Vanagon/ '84 Westy "Dutiful Passage" '85 GL "Poor Relation"
Have something to add on this topic today? Revive this thread in the forum »