Skip to main content
Gerry | Vanagon
Checking account...
← vanagon.com home · Continue the discussion in the forum
VanagonEuroVan
Subject:Re: replacing fuel injection hoses in engine compartment
From:Smola, Tony
Date:Thu, 15 Feb 2001 18:44:31 -0600

renewing engine compartent fuel lines:

   I have noticed that VW loved installing those lovely 1X use hose clamps.

And of course removing them is always fun. ( I've found that aviation snips
work well)

If you do decide to do this yourself, make sure you use high pressure FI
hose
( stronger than reg fuel hose ) it is more expensive but you must  use it or
risk fire.

I would also reccomend the hose clamps that are unobtrusive, ( meaning that
they are not just a single band
that tightens.  VW has the good ones they have an inner sleeve that prevents
pinching of the hose.

Save the heat sheathing that is on fuel lines now. This is that yellowish
hose cover on the fuel lines. You can
clean it up with some acetone or paint it black following a good cleaning
for a nice look.
----one final note try to replace all of the fuel lines that are accessable
beneath the van as well,  a prudent
 measure that could save your a$$

And of course following this type of job be sure to recheck all connections
and pressure up the system and check for leaks.
Having a fire extinguisher handy is a good idea.

Gas fires are not easily extinguished with just water, in fact they just
spread the fire in a lake of flames.
(personal experience from a long time ago )

that's all folks.

Malibu Tony 85' Westy

Have something to add on this topic today? Revive this thread in the forum »