

| Subject: | Re: Water Level Indicator Red Blinking Light |
| From: | John Rodgers |
| Date: | Sun, 11 Mar 2001 20:34:58 -0600 |
Regards the coolant itself, somewhere I read that if the coolant is not kept close to the 50/50 mix specified in the manual you can get a blinking red warning light. Seems reasonable to me. John Rodgers 88 GL Driver Leon Korkin wrote: > > Those sensors will last and work a long time if occasionaly pulled out and > cleaned(those 2 metal pins with very fine sandpaper). The old coolant will > also make them fail(blink), time to put in fresh coolant. > Leon > 85 Subwagen westy > > John Rodgers wrote: > > > 99 chances out of a 100 it's not the gage but the sensor in the > > expansion tank. They go bad all the time, but I have never heard of > > anyone haveing to replace the gage in the instrument cluster. That would > > be a real PITA. The sensors are cheap, less that $10 I think, brand new, > > from the Ron Salmon or Ken Wilford, and others. I have had so much > > trouble with them I keep a spare amongst my spare parts in my > > maintenance and emergency road kit. You might want to try replacing the > > sensor unit before doing anything more. > > > > John Rodgers > > 88 GL Driver > > > > > George Averill wrote: > > > > > > I need some ideas for replacing the temperature gage that contains the > > > red blinking light that indicates low water in the water reservoir. > > > This has been an ongoing problem for several years. Now I am working > > > on it again. > > > > > > In the past, I have replaced the gage with a used one that worked > > > several months then quit. Then I replaced the gage with one from VW > > > which lasted about six months. > > > > > > My questions are: > > > 1. What sources are there for replacement gages? (Does anyone stock > > > them besides the dealer?) > > > 2. Has anyone built a separate water level gage to bypass the one > > > that came with the vehicle? > > > 3. Any ideas why the gages keep going bad? > > > > > > Thanks in advance. If you send a reply to this message, please send > > > it directly to me by e-mail so your reply won't get lost in all of the > > > many messages on the site. I have a hard time reading all of them. > > > > > > George > > > 84 Camper > > > Columbus, GA > > > > > > P.S. The rear water heater core is in and working great! The > > > replacement was a snap; no trouble at all. Thanks to all who > > > responded with help.
Have something to add on this topic today? Revive this thread in the forum »