I, for one, would be extremely reluctant to run wires from the "computer"
all the way to the dash.  It seems to me one would be too liable to shorts,
picking up stray voltages, adding undesirable capacitance, etc., etc., etc.
I continue to be amazed that the Digitool works as well as it apparently
does.

Dave in KC
85 Westy
http://members.fortunecity.com/davebaker1

----- Original Message -----
From: Jay L Snyder <Jay.L.Snyder@USA.DUPONT.COM>
To: <vanagon@GERRY.VANAGON.COM>
Sent: Monday, March 12, 2001 2:22 PM
Subject: Digijet Diagnostic Aide

> I am thinking of running a cable with 4 or 5 leads from the engine
> compartment to the front so I can monitor the FI system while I drive.
> (Poor Man's Digitool).  Right now I am considering:  throttle switch (idle
> position), O2 sensor output and possibly Temp II sender.  Any others more
> important?   I could add the WOT switch.  An extra lead could be moved
> around to several points like the P/S switch, A/C compressor,...?
>                                                         Jay '85 Westy