Skip to main content
Gerry | Vanagon
Checking account...
← vanagon.com home · Continue the discussion in the forum
VanagonEuroVan
Subject:Re: O2 Sensors, and harness connetion failure
From:Chuck Mathis
Date:Tue, 6 Mar 2001 12:52:54 EST

Mark,

Is the VW fix specific to the 2.1L/Digifant or the 1.9L/Digijet?  If it works for us poor souls with the Digijet one-wire sensors, it could make a bunch of us retty happy.

Chuck
'85 Wolfsburg Westy -- 'Roland'

In a message dated Tue, 6 Mar 2001 12:09:23 PM Eastern Standard Time, Mark Keller <kelphoto@ISLANDNET.COM> writes:

<< I posted that O2 sensor provides corrective data, to the ECU.  The O2
sensor doesn't control the ECU, engine, or the AFM.

The O2 sensor harness, has been written up in the technical bulletins as
a failing on some vehicles.  There is a VW kit, to replace the O2 sensor
lead from the engine compartment to the ECU connector.

Engine's which run oddly when a known good O2 sensor is installed,
should be examined for the wiring harness fault.

You can measure continuity from the harness connect to the engine
compartment connector to verify this.
 >>

Have something to add on this topic today? Revive this thread in the forum »