How much water is in the tank? The early LED panels sense when the tank
is very low and disable the pump by removing power to it. If you have 4
LEDs on the left column and the 2 lower ones are both RED, you may have
this model of panel.

There are at least 4 different LED panels for the Westy kitchen. The
80+81 models are the most likely to have the water pump power cut-off
circuit. The later models did away with this feature and used the lower
left LED (green) for fridge pilot light indication. The early panels
either had no pilot LED or had a red LED alone near the center of the
panel.

If you have the early type panel and no power to the pump even when the
water tank is not empty then the panel may have a fault. I just bypass
the tank empty logic and enable power to the pump all the time like the
newer panels. The tank level sensor circuits often get flakey with age.

Mark

> Zoltan wrote:
>
> My faucet is not operating.  I have changed the pump.  It did work
> after that.  Now there is not power there and I can't find any fault.
> The fuses are OK unless there is another fuse for this.
> Anyone would know this?
> Zoltan