In a message dated 3/24/01 12:41:11 PM Eastern Standard Time,
CTONLINE@WEBTV.NET writes:

> Here is what I did, and it took all of 5 minutes.
> I removed the front of the seatbase (4 screws) and took my die grinder,
> with a small cutting bit, and cut the stupid piece that goes under the
> vent, off.
> BANG !!!
> Off comes the cover!!
> What a stupid idea the guy had that designed that gizmo.
> Now I can remove the cover at will.
> No more being a contortionist, or swearing.
> A Dremel tool will work if you don't have any air, or a Die grinder.
>
>

good idea!!   alot easier than removing the damn seat :<)
thanks
chris

[text/html]