The black part is faded to a washed-out gray - so I'm thinking that I need
to redo the whole thing.

Todd

'88 Westy

Mark Keller wrote:

> Todd,
>
> Assuming you want the raised portion black and it's black now  why not
> mask it over. Blow the color on the uppper and lower areas.  Then unmask
> the black area, and clearcoat the entire panel.
>
> This is the procedure I used.  Except I had made repairs which required
> the black areas to be coated.  I bypassed the black epoxy paint stage by
> using black epoxy primer for the paint preparation.
>
> Sincerely,
>
> Mark Keller
> 91 Carat
> Cowichan Bay, B.C.