I believe you are thinking of Eric Idle, and he's still in the Circus... 8~]

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@GERRY.VANAGON.COM]On Behalf
Of Jeff Schiebel
Sent: Tuesday, April 03, 2001 1:53 PM
To: vanagon@GERRY.VANAGON.COM
Subject: Erratic idle

Hi,
    My 84 did exactly the same thing. I checked my temp 2 sensor and found
that it had about 60-70 ohms less resistance when fully warm then the specs
said it should have. I am not sure if this would screw it up or not. I ended
up screwing in the idle bypass screw about .5 turns it smoothed it right
out.
            Hope this might help,
                                    Jeff s