Howdy folks, I'm stickin in this here westy kit and I'm down to a few wires with no place to go. A few notes on the wiring
from the wrecking yard woulda been real helpfull, but they have my money now and well, you know. So what I have is one pair
of wires right under the sink that are screwed into the front cabinet wall right under the sink, they could just be hooked
together (the terminators would allow this), anyone know where these go?

I also gots me a pair of wires also under the sink, one black one green, completely homeless. So far I have NO connections
to the vans wiring system so some of these obviously go to simple 12V and ground.

Other mystery is.... on the side of the fresh water tank there are 3 terminals where wires attach, they then go to a little
black box on the tank. It's fairly clear even to me that these are for water level sensing, but I see no way for these to
connect to the other cabinet with the LED's ??? How does this black box connect to the other cabinet????

Ok, last one. My fresh water drain presently consists of a threaded hole in the bottom of the tank. What's the factory
configuration on this? Other (ok I lied) thing is my sink drain is the same except for not even a hole in the floor. Does
this large black sink drain just dump out onto the ground or are the two drains tied together somehow? I know the bottom of
this black sink drain hose used to connect to something becuase it has clamp marks on it.

so much for a "complete" kit.

thanks to ya'all

mark...