I've got a cover on my (canadian westy) stove... It has stainless on the
inside of the cover...  Is this what we're talking about?

Clarity is the hallmark of David's explanations, but this one leaves me
quite perplexed??????????  We need pictures.  Anyone?

JGS

----- Original Message -----
From: David Beierl <dbeierl@ATTGLOBAL.NET>
To: <vanagon@GERRY.VANAGON.COM>
Sent: Saturday, April 21, 2001 2:17 PM
Subject: Re: pic of flip down stove cover

..........
>
> Drainboard is thin stainless steel with a small raised lip at the edges, a
> slightly depressed center section and a slot at the sink end to
> drain.  It's just long enough to overhang the sink very slightly.  It's
> formed in an L-section matching the inside of the cabinet lid, with the
> short leg of the L resting on the stove inboard of the grate.
>
> The hinges are about an inch long, tubular and beneath the draining
> surface.  Hinge pin on the after end is simply a longer bolt in the
> existing hinge; on the forward end is a separate fitting identical to the
> forward cabinet hinge (pintle half), again with a longer bolt.
>
> The short leg has two holes in it that engage spring-loaded buttons
> embedded in the inside of the vertical part of the cabinet lid.
>
> That's all there is...
>
> david
>