It's hard to say.  Why don't you get a temp gauge and put it in there to
make sure what the temp is.
Sure the best performance of the fridge is on 120V but it is pretty good at
the other two modes.
There maybe some other guy who can tell more.
Zoltan
----- Original Message -----
From: "radish150" <radish150@earthlink.net>
To: <vanagon@GERRY.VANAGON.COM>
Sent: Wednesday, April 25, 2001 3:25 PM
Subject: warm refer on propane

> Hey listees, wondering if anyone has any advice for me on this refer
issue. I fired it up with some difficulty the other day for the first time
on propane. I had to pump it quite a few times before it actually started,
but when it did the needle climbed rapidly to the high end of the green
scale. After letting it sit for 16hrs or so I went out to check and it's
luke warm with a slight sensation of coolness on the fins (needle still in
the green), my thermo is set to MAX. It seems to cool "ok" on AC, nothing
spectacular, but acceptable.
>
> Any ideas?
> thanks
> mark...