

| Subject: | Re: New Engine - No Power |
| From: | David Beierl |
| Date: | Sat, 28 Apr 2001 13:36:28 -0400 |
At 12:42 PM 4/28/2001, Paul M. Hillbish wrote: >The reason I ask is, I have a 1.9L Westy, I am aware that I have an exhaust >leak somewhere, but my exhaust is quite loud, and I have very little power >for acceleration. On a good flat ground, I can get up to about 65, but it >takes a while. Recently, I was able to drive an 89 2.1L, which was extremely That is *definitely abnormal* for a 1.9l -- you should be able to exceed 90 on genuinely flat ground with no wind (and lots of room). 70 up a mild grade is quite practical -- even better if you start at 75. If you have an exhaust leak your mixture is almost guaranteed to be rich, possibly very rich. The only way to run a Digi* system with an exhaust leak is to unplug the O2 sensor and let the system run open loop. At that point it is up to your AFM calibration. The way to discover a clogged cat is to take it off and look/tap per Bentley 26.11 -- however if you tap the cat while in place and hear rattling, it is definitely a goner. david David Beierl - Providence, RI http://pws.prserv.net/synergy/Vanagon/ '84 Westy "Dutiful Passage" '85 GL "Poor Relation"
Have something to add on this topic today? Revive this thread in the forum »