I just took my driveshaft out this weekend and I seem to remember it
only rotated about 1/8" - 1/4" when connected.  As others have
suggested, I would start there.  Once the shaft is out you can check the
u-joints by making sure they are tight but turn freely.  If they're
shot, you can check the archives for _lots_ of postings about u-joint
replacement.

JN

Alan Hosage wrote:
>
> 1987 Syncro with 135,000
>
.....
>   Driveshaft seems tight it turns about 1 inch or so, seems normal.  U-joints
> look ok, but what should I be looking for?