Why not wire the driving light through your high beam circuit and the fog
through your lows?  Of course, also through your dash switch.

Karl Wolz

----- Original Message -----
From: "Stan Wilder" <wilden1@juno.com>
To: <vanagon@GERRY.VANAGON.COM>
Sent: Thursday, May 03, 2001 8:50 AM
Subject: Combo Driving and Fog Light Hookup

> I have a set of Bosch lights, one is a high powered driving light and the
> other is a wide beam fog light.
> Has anybody got the wiring diagram for these lights ?
> I have the OEM VW Dash switch that goes in the instrument cluster. The
> switch has two positions like the headlight switch has for park light and
> headlights.
> I've got the lights working but I know that the repay is not correctly
> wired because both lights come on.
> The proper wiring will give me one fog light in center position on the
> switch and high power driving light in the full on position.
> Has anybody got the wiring diagram for these lights ?
> The relay has numbered terminals but the switch does not.
> Very confusing. I've blown about a half dozen fuses trying various
> hookups and have stopped because I don't want to blow out this rare and
> probably expensive switch.
> I can't go by color codes because this was added to the original vehicle
> after delivery, i just put it in the same way it came out since the
> colors of the wires don't correspond with any schematics I have.
>