Skip to main content
Gerry | Vanagon
Checking account...
← vanagon.com home · Continue the discussion in the forum
Subject:Re: pulling engine
From:David Beierl
Date:Thu, 3 May 2001 20:27:50 -0400
At 07:32 PM 5/3/2001, Larry Alofs wrote:
>The torque converter stays with the trans.  You unbolt it from the engine
>by accessing 4(?) bolts  thru a hole near the top of the engine slightly
>left of center as I recall.  You have to turn the
>engine slowly until each one lines up with the hole.

So *THAT'S* what that hole is for.  All the neurons I've wasted trying to
think of an excuse for it, not to mention cussing the little cover that is
too loose.

d

David Beierl - Providence, RI
  http://pws.prserv.net/synergy/Vanagon/
'84 Westy "Dutiful Passage"
'85 GL "Poor Relation"