

| Subject: | Re: Is a Porsche 911 engine too powerful for a Vanagon and/or Syncro Drivetrain? |
| From: | Andrew Grebneff |
| Date: | Mon, 14 May 2001 19:49:00 +1200 |
>Most transmissions are rated for torque capacity. Although the Porsche 2.7 >has more torque than your 2.0 Type IV, the torque comes on higher in the >power band. In my opinion, unless you like tire-smoking take-offs, your >transmission should handle the extra power. I doubt it. Enough 091s and 094s blow to indicate that they have trouble handling the stock Type 4 engine. And you put a powerful engine in with the intent of USING it, otherwise just put in a 36hp 1200, it'll bolt up. >There's nothing like the song of a Porsche flat-6 screaming at 6000 RPM! Except for a Subaru flat-6 at 7500rpm. >And you will have to rev it high to get the power out of it. As a wonderful >benefit, should you keep the stock 4-speed, you will be in the meat of the >power band at about, say, 90 MPH in fourth gear. Then you floor it and pass >all the Vana-barus! Revenge is upon us! Shouldn't have to wind the 3.3 Subaru up, and your Porsche-powered Vanagon certainly won't leave it (or a 290hp Legacy/WRX-powered van) behind! Andrew Grebneff 165 Evans St, Dunedin, New Zealand fax 64 (3) 479-7527 <andrew.grebneff@stonebow.otago.ac.nz> www.goingplatinum.com/member/vw1 www.highyieldcrusaders.ws/ref.html?ref=vw www.aciimoney.com/index.shtml?vw1 VW & Toyota vans, Toyota diesels and Macintoshes rule
Have something to add on this topic today? Revive this thread in the forum »