Skip to main content
Gerry | Vanagon
Checking account...
← vanagon.com home · Continue the discussion in the forum
Subject:Re: pulling and replacing pilot bearing in crankshaft
From:Rico Sapolich
Date:Thu, 31 May 2001 00:12:02 EDT
In a message dated 5/30/01 11:24:16 PM, thewestyman@MINDSPRING.COM writes:

<< The grease and dowel method works the best, with no chance

of buggering the hole in the crank.
 >>

Amen to that!  I have used the dowel method on all types of bearings and even
bushings mounted in blind holes and it has never failed me.  Just be sure of
your aim with the beater and give the dowel a smart rap.  Oh, and make sure
the dowel fits snuggly; Listerine doesn't dissolve grease.

Rich