NAPA sells some 1200 degree sheathing for electrical automotive wiring that
is a conglomeration of silicone and fiberglass, but it's about $30 for a 12'
roll.  Opps, I forgot, we're working on a Vanagon, that's cheap!!!  I reused
my sheathing and  saved the good NAPA stuff for the oil pressure and temp
wires for the vdo gauges snaking down to the bowels of the crankcase.

Dimwitted Moose and Flying Squirrel
-----Original Message-----
From: Karl Wolz <wolzphoto@WORLDNET.ATT.NET>
To: vanagon@GERRY.VANAGON.COM <vanagon@GERRY.VANAGON.COM>
Date: Thursday, May 31, 2001 3:24 PM
Subject: Re: Fuel line sheathing replacement?

>Are you really supposed to replace that stuff!  ;-)
>
>I left mine off.  We'll see what comes of it.
>
>Karl Wolz
>
>----- Original Message -----
>From: "Steve Gough" <vw@EMRIVER.COM>
>To: <vanagon@GERRY.VANAGON.COM>
>Sent: Thursday, May 31, 2001 10:31 AM
>Subject: Fuel line sheathing replacement?
>
>
>Any advice on what material to use to replace the anti-abrasion
>sheathing on the four FI hoses going to the fuel rails on my 2.1L?
>
>I'm replacing all the fuel lines, and this stuff is cracked/brittle.
>
>Thanks,
>
>Steve