Skip to main content
Gerry | Vanagon
Checking account...
← vanagon.com home · Continue the discussion in the forum
Subject:Re: what do you need with a TIICO conversion
From:puzerewski
Date:Mon, 4 Jun 2001 18:48:34 -0400

> i have a few questions regarding TIICO conversions.  I've read ken
> wilfey's posts regarding the tiico conversions and am left a bit confused.
> What do i need to use from my old wasserboxer engine on the tiico?  see
> below regarding my concerns:
>
> 1) an oxygen sensor wiring harness isn't included? That seems silly.

Sure does, but that is a true statement the kit does not come with one.You
ccan use your old one.

> Oxygen sensor too. Not included? huh?

Same as above

> 2) will the standard vanagon mufflers work?

Yes, they will work........we had to replace on the Synchro we did the
conversion on do to bad shape.
.
> 3) what the difference in a muffler and tailpipe?
The tailpipe is a seperate piece that attaches to the tailpipe...it is sold
separate from the muffler

> 4) what is the muffler carrier? Are those the straps that hold the muffler
> out of the mud? difference between the strap and muffler carrier?The
carrier mounts behind the muffler more or less...the straps attach to it and
the muffler...more or less...no flames or nitpicky corrections here please
:)

> 6) are the old injectors needed? or does it come w/ new ones?

It does not come with new ones you have to supply your own.

> 7) auto tranny pan and fill tube? (only for auto conversions)

Can't help ya here ours was manual

> 8) timing and co? Can i do this or will i need a s shop's assistance here?

You can do it.

>
> I'm a bit confused. So the TIICO is not a turn-key operation?? But more
> like an 'improved' long block?

It is more or less turn-key............BUT they seem to have a tendency to
short parts in the kit, and thus you have to wait to get stuff.  REALLY
sucks.  Really goes into the car like it was made to go there.

>
>
> Thanks

No Problem

>
> Matthew Pollard