Riley, i can't help too much, but i'll try to send you down the right
path...

1) is there power to the coil? Should be about 12v.  Check this by doing a
volt test between the spade plug on the side of the coil and ground.  Be
sure your ignition is on by the way!

> Well i bought myself a new coil and hooked it up to the system. Same problem
> exists. no spark at all.
>
> What could prevent the coil from not zapping besides possbily my incorrect
> wiring....
>
> Thanks
>
> Riley Kettner
>
> > > The archive search did not work for me today, but i have a desperate
> question. I am getting no spark at my plugs. I cleaned the distributor and
> monkeyed around with cleaning other contacts to no avail.
> > >
> > > I don't know much about cars, but i suspect the ignition coil because of
> the lack of spark. My fuel injection computer had problems a long time ago,
> so i am partially suspecting this as well.
> > >
> > > Thanks
> > >
> > > Riley
> > >
> >
> >
>