John;
        I had an air blockage in the tube near the bleader valve in the
engine compartment. This is likely because it is a high spot. The only
way I could get it out was to loosen the clamp and work a flat head screw
driver under the lip of the hose. Do it at the highest spot i.e.12
o'clock so you get all the air. I do not know why the bleeder valve could
not ccomplish the same.

Good Luck and Drive Safely
Ken Lewis
86 Crewcab,60 356
http://Neksiwel.20m.com/

On Tue, 12 Jun 2001 22:02:08 -0400 John Flaherty <jflahert@MAINE.RR.COM>
writes:
> Hi all,
>
> Well the new radiator's in. And......STILL running hot. I'm stumped.
.....> Thanks,
>
> John Flaherty
> Portland, Maine
>
________________________________________________________________
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today!  For your FREE software, visit:
http://dl.www.juno.com/get/tagj.