

| Subject: | Re: replacing gas tank crossover tubes |
| From: | Charles McGehee |
| Date: | Thu, 21 Jun 2001 23:03:18 -0700 |
Thanks, Mark. I'll be gone for the next few weeks, but when I return I'm going to give it whirl. Charles '85 Westy At 01:41 AM 6/22/01 -0700, you wrote: >Hi Charles, >I did it on my '84 without TOO much grief with everything in place. I did >remove the tires for easier access. You basically have to look at the >position of everything and then reach in and feel your way at it. I did >lubricate the grommets and pipe to ease it in a bit. One thing to be >careful with is not to push the grommets through the holes into the tank. >They didn't seem to want to do this on me, but it might be prudent to get an >extra when at purchasing them (if you need grommets) just in case. My >failure was that one of the small overflow lines broke free from the "tee" >and that caused the original leak. My grommets were fine. >Patients, Grasshopper, will almost always overcome force :-) >Mark >----- Original Message ----- >From: "Charles McGehee" <chasm@ELLTEL.NET> >To: <vanagon@GERRY.VANAGON.COM> >Sent: Thursday, June 21, 2001 9:02 AM >Subject: replacing gas tank crossover tubes > > > > Listees, > > > > Sometime this month Vanagonite told of replacing the gas tank crossover > > tubes without dropping the tank. I can't find it in the message archives, > > however. Can' t remember its subject line and no key words seem to work. > > > > Does anyone remember this message and can you point me to it? > > > > Charles > > '85 Westy > >
Have something to add on this topic today? Revive this thread in the forum »