In a message dated 6/29/01 4:41:59 PM Pacific Daylight Time,
ricin@MEDIAONE.NET writes:

<< ok, I have a real question now, I'm doing the front disc brakes and turning
 the rotors on my 85 and all the bentley says is "Grease cap, remove with vw
 637/2". I've taken the little retaining clip off the little square nut thing
 sticking out of the grease cap, what next? I've tried prying and banging but
 don't want to proceed if in fact the cap "screws" off. And yes, I'm doing
 the brakes so I can slow down after I break the sound barrier :) >>

Use a very BIG screwdriver on the side of the cap to either pry or tap the
driver handle with a small hammer.

After which, you should perforate all your brake lines with small needles.
That way, when you go supersonic, the expansion caused by heat will seal the
pores appropriately That you can have still brake pressure when it comes time
to stop. Kinda like the way the SR-71 has leaky fuel tanks when it's at rest.

Believe me it's all true. If it doesn't work, ask for me in Georgia under the
name of HK Sawyer. Yeah that's my real name.

BenT
my current fake name