Skip to main content
Gerry | Vanagon
Checking account...
← vanagon.com home · Continue the discussion in the forum
VanagonEuroVan
Subject:Re: [Syncro] WTB: inline4 powersteering bracket
From:Dave Bayer
Date:Fri, 6 Jul 2001 18:04:23 -0700

>>Anyway, I need a PS bracket and possibly even an AC compressor
>>bracket from a
>>line 4 engine like a late model Jetta/Golf/Passat. Someone on the
>>lists had
>>mentioned to me once that turbodiesel Jettas did come with PS.

Well, a trip to the dealer to look at the ETKA shows that there were
Diesel Golfs and Jettas with AC and powersteering. The list of parts
needed was a little long to write down... You might try a pick and pull
for the brackets...

The top bracket appears to be diesel specific the thing that holds
the alternator, AC compressor over the water pump) while the
rest of PS bracket is uniform between diesel and gas engines with
the exception of an additional spacer for the pulley on the diesel.
I happen to have picked the PS pump bracket up for a conversion
but not needing it - it's yours if you come get it if you want... You
will still need to find the two pieces to the alternator/ac compressor
mount:

068 903 141 K
068 260 917 B
and then the bits for some additional roller, the ac compressor pulley,
and the spacer for ps pulley.

>>figured that
>>to be the best donor candidate. I doubt that I will find a used
>>Tiico mount out there.

The tiico mount is a POS imho - it prepetuates and worsens that
horrible belt drive system vw used on the diesel vanagons. Since it is
going in your double cab, clearance will not be an issue (as it would be
only in 2wd vanagons) so go with the better belt system.

dave

Have something to add on this topic today? Revive this thread in the forum »