Scott,

It's been a while since I've been in that area but if I remember correctly
the hinge to the glove box is on the bottom (I think 2 Philips screws) but
if your careful I just bend the catches in and the whole thing drop forward
out of the way.  As far as the two panels there are no screws, just work
with it and they should pop off.

I hope someone else can confirm, as is said I haven't been in that area in a
few years (since I had to remove the dash & heater to get a dead mouse out
of the plenum chamber of the heater).

Jere
90 GL
88 GL

 -----Original Message-----
From:   Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com]  On Behalf Of
Scott Kraning
Sent:   Thursday, July 12, 2001 9:04 PM
To:     vanagon@GERRY.VANAGON.COM
Subject:        Glove box removal (help!)

Hi List -

I am in the midst of installing some new speakers and I got to the part
where
I needed to remove the glove box (perfect place for an amp back  in there,
right?)...but I'm stuck! What is the best way to remove the box? All the
screws seem to be very well hidden!
Also, there are 2 other panels that I can't figure out how to remove: 1
below
the radio, 1 is the automatic shifter housing box. Where are these screws
located?

Thanks,

Scott K.
88 Westy