Skip to main content
Gerry | Vanagon
Checking account...
← vanagon.com home · Continue the discussion in the forum
VanagonEuroVan
Subject:Re: Fuel Line Reducer
From:Ari Ollikainen
Date:Fri, 20 Jul 2001 12:47:35 -0700

At 11:01 AM -0700 7/20/01, Stuart MacMillan wrote:
>So that's why the huge metal fuel filter has a little bitty plastic fuel
>filter in front of it!!  I never could make any sense out of that, but
>this explains it!  Fram and others can produce the filter for much less
>than VW could make, ship, and stock an adapter.  Duh.  Now if we could
>just get Fram to leave the guts out of it it would be even better.
>
>David Beierl wrote:
> >
> > At 06:32 PM 7/19/2001, JOHN REYNOLDS wrote:
> > >Spent about 4 hours today trying to find the 12mm to 8mm plastic reducer
> > >fitting used prior to fuel pump on , at least, 81 Vanagons.  I believe
> > >that newer Vanagons may use a 11m fuel line right to the pump, but on
> > >mine 7mm line comes out of the gas tank and then is stepped up to 11mm
> > >through this plastic fitting (12mm and 8mm diameter tubes)  and then
> > >about 4" or 12mm line feeds into the electric fuel pump.
> >
> > John, the square plastic fuel filter has 8mm inlet and 12mm outlet.  Why
> > not stick one of those in the line?
> >

        Somewhen in the dim past I recall that plastic reducer succumbing
        to alcohol induced rot and braking on one of my campers...the
        replacement from the local VW dealer (amazingly he had the part!)
        was made of brass.

   _/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/
   You can't depend on your judgement when your imagination is out of focus.
                                                          -- Mark Twain.
   _/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/

         OLTECO                    Ari Ollikainen
         P.O. BOX 20088            Networking Architecture and Technology
         Stanford, CA              Ari@OLTECO.com
         94309-0088                415.517.3519

Have something to add on this topic today? Revive this thread in the forum »