

| Subject: | Re: Clutch master cylinder and Slave cylinder Questions??? |
| From: | Miguel Calvin |
| Date: | Tue, 24 Jul 2001 23:37:21 -0400 |
on 7/24/01 7:59 PM, Brian McClure at SBWC919@AOL.COM wrote: > It figures..... 3 days before the Chicago VW campout, and my clutch starts > getting funky! > Here are the symptoms. The clutch engages/disengages about 1 inch off the > floor. > I have no visible leaks anywhere. > I had my wife push the pedal down by hand until she felt resistance. I was > watching the slave cylinder, it didnt move untile resistance was met, maybe > only 1/2 to 3/4 inches of travel. > I think this sounds like a master cylinder leaking internally- but I have > been wrong before! > Has anyone experienced this? Is my diagnosis even close, or am I barking up > the wrong tree? How bad is the master to change?? > HELP! > Brian > 83 Urabus I would try bleeding it first before you panic, and check your resevoir. If your brakes are leaking, the level in the common resevoir will drop below the outlet for the clutch before you run out of fluid for the brakes... -- Miguel
Have something to add on this topic today? Revive this thread in the forum »