One trick you may try.
Take a good socket that fits the bolt head and hit the socket solidly
with a 3 Pound hammer (do not use an extension bar, hold it with channel
locks or vice grips). This should break it loose and you can turn it with
a breaker bar. Be sure you use a six point socket, an impact socket in
good condition. Make sure the socket has good straight sides.

Stan Wilder

On Sun, 22 Jul 2001 14:08:01 -0400 Miguel Calvin <mcalvin@MAC.COM>
writes:
> Oh wise ones,
>
> I have now tried a breaker bar and a rented impact wrench, but I
> still can't
> get any of the five bolts off the flywheel.  The impact wrench is
> slowly
> chewing up the heads and the breaker bar just laughs at me.
>
> The Bently says these bolts are torqued to 80 ft lbs but I don't
> beleive it
> anymore.
>
> Anyone have any final suggestions before I just sign over my
> first-born to a
> mechanic?
> --
> Miguel

________________________________________________________________
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today!  For your FREE software, visit:
http://dl.www.juno.com/get/tagj.