I am doing a TiiCo conversion and will no longer need my current 2.1l
waterleaker. THIS ENGINE DOES HAVE A HEAD PROBLEM. Seal between waterjacket
and cylinders is leaking (exhaust gases getting into coolant). Other than
the head issues, it's a fairly strong runner. Oil pressure is about 9psi at
idle and gains about 10 psi for every 1000 rpms. This motor has just over
100,000 miles on it (100,471 or something like that. Not sure without
looking at the odo). . The engine will be complete EXCEPT FOR Alternator,
Power steering pump, A/C compressor, and injectors.

I will be removing the wiring harness as completely (and carefully) as
possible. The harness and ECU (already wired for Digitool) will be for sale
as well. At this point I'm thinking about $500 for the engine and $350 for
the harness (w/Digitool). Any reasonable offers will be considered. This
engine is located in Torrance, CA (approx. 6 miles south-east of LAX along
the 405 fwy). Shipping will be considered as long as purchaser pays
shipping charges.

Sean B.
'90 V'gon, "Happy Bus", pseudo Wolfy
Torrance, CA