I took my Van to have it aligned, and they give you a printout of the
results along with the specified range that is acceptable for the
vehicle.  I was comparing the sheet to what is written in the factory
manual and I found a number of discrepancies between the sheet that the
shop gave me and what is listed in Bentley.

The printout does say  "Vanagon 1980-1991 all except syncro"

Most of the discrepancies have the shop numbers in a narrower range (but
are within the factory specs). However the numbers for the rear Camber
is way off.

The shop says:   Rear Camber -0.17 to 0.17

However Bently says -50' +- 30'   which I calculate out to:   0.033 to
1.3

Is there an error in Bentley? or the Shop machine?

I recall seeing somewhere that some machines have the wrong alignment
numbers - is that it?

Thanks

Todd
'88 Westy