

| Subject: | Re: How do I change the starter motor? |
| From: | Larry Alofs |
| Date: | Tue, 28 Aug 2001 12:05:33 -0500 |
Dominic Robertson wrote: > I have an 87 Westy Syncro and it has a problem starting every now and then. > To start it I have to put it into 2nd gear and bump it and then wait a bit > and it starts. It seems to me like a problem with the starter motor? Is > it easy to change? Thanks for any advice. > > regards > > Dominic > 87 Westy Syncro You did not describe the behavior completely. IF you do not hear any noise when you turn the key, you may have a rather common problem. With age, the resistance in the circuitry increases enough that not enough current is flowing to activate the solenoid on the starter. This resistance can be in the ignition switch, the wires, the connectors, and the starter itself (since the solenoid circuit reaches ground thru the starter). Often, an emergency alternative to push starting is to tap on the starter or solenoid while a helper holds the key in the start position. I believe that the Bus Depot sells a "hard start relay kit" to help solve this problem. I have installed similar relays in two of my vanagons and one bus. Larry A.
Have something to add on this topic today? Revive this thread in the forum »