Skip to main content
Gerry | Vanagon
Checking account...
← vanagon.com home · Continue the discussion in the forum
Subject:Re: > bad fill up flow...
From:Max Wellhouse
Date:Thu, 30 Aug 2001 02:26:44 -0500

Tony and Listees:  I had the same problem shortly after I did the Wilfy fix
on the top vent seals replacement proceedure.  Turns out that he little dab
of silicone I used to seal up the filler neck breather nipple swelled up so
big that it virtually prevented any air from passing through it.  This is
likely not your case, but some sort of blockage in that line is definitely
causing your problem.  It's the plastic pipe that is about 5/8" in diameter
and runs pretty much parallel to the filler neck into the inner cavity of
the van.
----- Original Message -----
From: "Tony Demille" <tony@CANDESA.COM>
To: <vanagon@GERRY.VANAGON.COM>
Sent: Wednesday, August 29, 2001 4:38 PM
Subject: > bad fill up flow...

> when i attempt to fill up my gas tank at the station
> i can't allow the flow to go full speed. if i do, i get back-flow
> which triggers the auto-shut off in the handle.
> i have to pump gas super-slow in order for this not to happen.
> what's wrong?
>
> thanks
>
> t
>
> candesa
> tony demille :: creative director
> pixel slave liberator
>
> (v) 801.426.5450
> www.candesa.com