I just chewed these old rubber hoses off with pliers, it worked quite
nicely.

_____

Donald Baxter  Iowa City, Iowa
(319) 337-0494
www.mindspring.com/~onanov

"I respect faith, but doubt is what gets you an education."
       -- Wislon Mizner.

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf
Of Cooper, Jonathan R.
Sent: Friday, September 07, 2001 8:27 AM
To: vanagon@GERRY.VANAGON.COM
Subject: Re: Hoses on fuel injectors

Yeah, that occurred to me as I was doing this. It's not just the sparks,
If you take the injectors out first you don't have that problem but the
metal heats up and gets red, so I started thinking this cannot be good
for the plastic underneath either. Mine held up nicely. Your results may
vary

Jonathan R. Cooper
Brzytwa, Quick & McCrystal
900 Skylight Office Tower
Cleveland, OH 44113
Cooper@BQMlaw.com

-----Original Message-----
From: Benjamin Tan [mailto:BenTbtstr8@AOL.COM]
Sent: Friday, September 07, 2001 12:48 AM
To: vanagon@GERRY.VANAGON.COM
Subject: Re: Hoses on fuel injectors

In a message dated 9/6/01 9:43:21 PM Pacific Daylight Time,
mrlucky@SCRUZ.NET
writes:

<< i've also heard a dremel will work well for this.  >>

Mr Bill,

Never use a powertool near open gas lines. Can you say "ka-boom"?

BenT