On the "Single Wire" oxy sensors .... some had male connectors and some had female connectors.

When I last replaced mine, the new sensor had the wrong connector for my setup (my green wire in the wiring harness is female) so I
cut the wire on the sensor and soldered on a spade connector.

Worked for me.

Mike
'84 GL

----- Original Message -----
From: "Peter Krogh" <VW85Westy@AOL.COM>
To: <vanagon@GERRY.VANAGON.COM>
Sent: Sunday, September 23, 2001 10:01 AM
Subject: OXY Sensor connect?

> I still don't know how to connect the oxy sensor.  The wire from it is just
> dangling in the engine compartment.  There is a green wire coming from the
> wiring harness and just hanging there, It could reach the oxy sensor wire, as
> I recall, but both have female spade connectors.  Do I need another wire to
> connect, or is the wrong wire on the oxy sensor, or is this green wire for
> something else entirely.
>
> What should the wire to the oxy sensor look like?
>
> Thanks,
> Peter