

| Subject: | Re: Water pump |
| From: | Jean-Guy Savoie |
| Date: | Fri, 12 Oct 2001 12:30:11 -0300 |
Oops... Just noticed that the link on Andrew's page was a link to Tom's page, sorry. Same comments apply, with the necessary modifications.. So Tom, I would invite you to perhaps add the below as an alternate method for pulley removal in your instructions. JGS 84 1.9L Westfalia Bleu Schtroumpf ----- Original Message ----- From: Jean-Guy Savoie <jgsavoie@NBNET.NB.CA> To: <vanagon@GERRY.VANAGON.COM> Sent: Friday, October 12, 2001 12:23 PM Subject: Re: Water pump > The instructions at Andrew's link were very helpfull to me. I would only > add a slight modification to them (and I would invite Andrew to perhaps add > this as an alternate method in his instructions). > > Andrew suggests torquing the fan belt super tight to get the pulley nuts > loose. Didn't work too well for me. > > I found that there was just enough room to put a medium sized pipe wrench in > back of the pulley and onto the triangular flange (bracket?, what would you > call it ?) to stop it from turning. Both removal and replacing the pulley > was easy this way, and you don't have to go through the extra steps of > thightening the fan belt. > > just my $ 0.02 worth > > JGS > > 84 1.9L Westfalia > Bleu Schtroumpf > > ----- Original Message ----- > From: Andrew M Fox <andrewf@HAWAII.EDU> > To: <vanagon@GERRY.VANAGON.COM> > Sent: Monday, October 08, 2001 1:59 PM > Subject: Re: Water pump > > > > Its pretty easy. There is a page on the web that discusses chaning the > > 1.9 L h20 pump and it is basically the same procedure. YOu can find that > > page by going to my specially indexed links page at: > > http://www2.hawaii.edu/~andrewf/vanagon/links.htm > > and then scrolling down to coolant or pressing control F and typing in > > water pump. > > > > good luck, > > Andrew FOx > > > > > > On Mon, 8 Oct 2001, Sonia Johnson wrote: > > > > > My water pump just died, and I'm wondering if this is a straightforward > > > repair, or is there anything complex about it? I can't find anything in > > > my Bently that shows how to replace it, but there is detailed directions > > > for draining, refilling and bleeding the system. Does anyone have any > > > advise or cautions for me? > > > > > > Thanks much, > > > Sonia J > > > ________________________________________________________________ > > > GET INTERNET ACCESS FROM JUNO! > > > Juno offers FREE or PREMIUM Internet access for less! > > > Join Juno today! For your FREE software, visit: > > > http://dl.www.juno.com/get/web/. > > > > > >
Have something to add on this topic today? Revive this thread in the forum »