I"ve been out of town on a ship for the last few days so sorry I did not
get back to you.
I've temporarily fixed the part with ABS heat activated glue and it's
working. If you can find the part please try and get it. I'll look tonight
for the prefix numbers but in general a 1.9 litre engine was in 83-85
(round headlights). The fitting in any other Vanagon is a single T fitting.
If you wanted a better description it looks more like an H fitting with a
bent leg.  Thanks again.

Tony

Stan Wilder wrote:

> It rained me out on my trip to the wrecking yards on Thursday but I'm
> going today.
> Can you tell me the motor prefix for the 1.9 and 2.1 engines, and where
> do i find the motor number?
>
> Stan
>
> On Wed, 10 Oct 2001 17:58:04 -0400 Tony Thompson
> <tonyt_eye@NS.SYMPATICO.CA> writes:
> > The part is connected by two very short hoses to the expansion (not
> > the
> > overflow tank) it is only on the 1.9 litre engines. If you look at
> > the link
> > shown  below it is part #19 referred to as the Double Tee fitting
> >
> > http://busdepot.com/water19N.htm
> >
> > If you see any fittings I'd be eternally grateful + I'd buy one and
> > pay for
> > shipping. Mine has what looks like a hairline crack down the skinny
> > interconnecting part that lets an amaxing amount of water blow out.
> > The VW part number is 025 121 438 and there is no B after the number
> > which
> > indicates that it is for a later model van.
> >
> > Thanks again
> >
> > Tony
> >
> ________________________________________________________________
> GET INTERNET ACCESS FROM JUNO!
> Juno offers FREE or PREMIUM Internet access for less!
> Join Juno today!  For your FREE software, visit:
> http://dl.www.juno.com/get/web/.