

| Subject: | Re: Parts suppliers for "Half Liley"? |
| From: | Stan Wilder |
| Date: | Fri, 26 Oct 2001 07:02:42 -0500 |
I've got a question for you about ceramic coated heads. My son (an artist) has a kiln that he can closely regulate temperatures on. Would it be possible to apply ceramic coatings in this type of kiln? I don't know if you know much about artiest but my son goes from feast to famine at three month intervals and if he could glass peen a few heads and pck up some of this business I'd do the research on materials and produce a few sets and test them. Since we're all facing a downward economy, I'd like to help him with an opportunity rather than more of my cash. Stan Wilder On Fri, 26 Oct 2001 07:36:57 EDT Chuck Mathis <CMathis227@AOL.COM> writes: > Joel, > > If you try to find this stuff specifically for the WBX you'll be out > of luck > just about anywhere but Fast German Auto. But, the plugs are > available from > any FLAPS that carries Bosch plugs. The part number IIRC is 4477 > but check > with me or the list to confirm this before you buy them. In the > parts > computer at Pep Boys they were listed for a Nissan pickup! The > ratio rockers > and pushrods can be sourced from any well supplied VW performance > shop as > they are the same pieces used for the Type 1 air cooled Bug and Type > 2 Bus > engines. > > While you're upgrading don't forget a K&N air filter. It improves > the > breathing some and every little bit helps. > > While you have the engine stripped down you can pick up a little > more power > by port matching the intake and exhaust manifolds. > > Chuck > '85 Wolfsburg Westy - 'Roland the Road Buffalo' > Smoothed ceramic coated exhaust, Turbomax muffler, polished throttle > body, > K&N, +4's, port matched exhaust, and 6-degrees BTDC timing. > > In a message dated 10/25/01 11:04:08 PM, LISTSERV@GERRY.VANAGON.COM > writes: > > << Volks, > this weekend I'll be tearing down my 2.1L Carat's engine to > replace > the > head gaskets and do the JBweld fix on the heads. While I have the > heads > off, I want to do the half liley. I just don't know where to get the > parts. > Ratio rocker arms? > Chromoly pushrods? > Bosh Platinum 4 spark plugs? > Please help. > Joel >> > ________________________________________________________________ GET INTERNET ACCESS FROM JUNO! Juno offers FREE or PREMIUM Internet access for less! Join Juno today! For your FREE software, visit: http://dl.www.juno.com/get/web/.
Have something to add on this topic today? Revive this thread in the forum »