In a message dated 10/26/01 1:07:13 PM, KENWILFY@AOL.COM writes:

<< I believe there is a switch that
tells the system when the wipers are back in the "park" position but I have
no idea where it is. >>

Ken,

When you say you tried a new motor, do you mean just the motor or the motor
with the gearhead?  I have to assume that you exchanged the gearhead motor en
toto.  I hate to ask this, but did you check the fuses?  Fuse number S17
specifically.  If the fuse is good, you should have voltage at terminal 53a
(GY/BK conductor of the connector) of the wiper motor with the ignition
switch on.  If this all checks out, then the rotary contact wiper park switch
in the GEARHEAD CASE is most likely hinky.

Rich