I would test the Temp Sensor II on the thermostat housing and see if the
resistence reading is correct per the Bentley manual.  You could check this
at the ECU which is more convenient.  The Bentley has the ECU pin info and
resistence chart.

Laurence Smith
90 Westy (Fanumbos)
Hamilton, Ontario

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@GERRY.VANAGON.COM]On Behalf
Of Anthony Bailey
Sent: Monday, October 29, 2001 1:39 PM
To: vanagon@GERRY.VANAGON.COM
Subject: cold starting

Hello all, I'm having a problem with my '87 Vanagon starting first thing
in the morning. It'll start but you have to keep it running with the gas
pedal for 30 seconds or so, sometimes a minute before it'll idle on its
own, otherwise it stalls. It's normally only the first time when its
cold that's it giving us the problem.
Any ideas? Tony
----------
this is coming to you from Anthony Bailey KC0HZP
(mailto:abailey@mac.com) Marble Hill, Missouri 63764