Skip to main content
Gerry | Vanagon
Checking account...
← vanagon.com home · Continue the discussion in the forum
VanagonEuroVan
Subject:Re: Good Flatbed Scanner for about $100
From:LKY
Date:Sat, 3 Nov 2001 11:40:34 -0500

Joe,

How about going to Kinkos and making a coy of your medical record and
priority mailing or FEDEX it to the VA.

Les
> -----Original Message-----
> From: Vanagon Mailing List [mailto:vanagon@GERRY.VANAGON.COM]On Behalf
> Of Joe
> Sent: Saturday, November 03, 2001 4:19 AM
> To: vanagon@GERRY.VANAGON.COM
> Subject: Good Flatbed Scanner for about $100
>
>
>         Yes, this is WAY "OT" but this is something of an
> emergency so please allow
> this intrusion.
>         Because they lost most of it I find myself needing to fax
> almost my entire
> medical record to the Veteran's Administration. I got several
> estimates from
> "Kinko's" and other such places, the lowest of which was about $80. If I
> went the Kinko's route I would be out $80 but if I kicked in a few extra
> bucks and got a cheap flatbed scanner I could do my own faxing
> plus I would
> be covered in the all-too-likely event they lose it again (I already have
> the fax modem and other stuff).
>         I did not think there would be all that much to buying a
> flatbed scanner
> but a trip to Best Buy, CompUSA and a few other stores showed me
> different.
> I need some objective advice. Several tries on the search engine yielded
> nothing but ads who's only advice was "buy me now!". It occurred
> to me that
> most of the folks on the Vanagon list were fairly level headed and
> practical. I also remembered several occasions where a number of list
> members talked about digitizing one thing or another for posting or
> emailing. This, plus the fact that it is Friday convinced me that this
> fishing expeditiion might be worth a shot. I figure the worst that could
> happen is someonw would have a good time chewing me out for no Vanagon
> content. So.....
>
>         Can someone here recommend a good Flatbed Scanner for
> about $100? Any
> warnings of models to keep away from? Any help appreciated.
>

Have something to add on this topic today? Revive this thread in the forum »