

| Subject: | Re: Strange rattle/squeek from engine during idle |
| From: | developtrust |
| Date: | Wed, 28 Nov 2001 17:50:57 -0800 |
Thanks. My mechanic agrees but as I posted later it seems to be the AC belt. But tightening all belts seems like a good idea, don't you think? William ----- Original Message ----- From: "sg" <sg@sunsetwinona.com> To: "developtrust" <developtrust@HOME.COM>; <vanagon@GERRY.VANAGON.COM> Sent: Wednesday, November 28, 2001 3:52 PM Subject: Re: Strange rattle/squeek from engine during idle > tighten your alternator belt: loosen the bolt/nut securing the alternator > to its positioning rod, use a metal pipe to wedge the alternator housing > away from the engine (ie pulling up), retighten bolt nut. before you do > this, notice how loose the belt is (you can use the looseness of the other > belts as a point of reference). tighten the belt a little at a time until > the squeak goes away, thus avoiding overtightening. > -steve and buster (who just underwent above procedure yesterday to elimate > similar squeak) > > ----- Original Message ----- > From: "developtrust" <developtrust@HOME.COM> > To: <vanagon@GERRY.VANAGON.COM> > Sent: Wednesday, November 28, 2001 3:47 PM > Subject: Strange rattle/squeek from engine during idle > > > > Greetings everyone, > > While delivering those seats I sold to www.forwardair.com this AM I > noticed > > an odd squeak during idle and start up coming from the engine compartment. > > > > Upon parking with emergency brake on and looking at the engine I could not > > seem to fine from where it came but when I pushed down on the alternator > it > > continued and pulled up it seemed to lessen. > > > > years ago I saw a mechanic put some kind of chalk on a fan belt to get rid > > of a squeak. could this be the same thing? > > > > The squeak is becoming irritating. It does not interfere with performance > > but only happens at idle with the clutch disengaged waiting at a red > light. > > > > Any help will be appreciated. It seems to be getting worse as time goes > by. > > > > William > > > >
Have something to add on this topic today? Revive this thread in the forum »