Kurt,

I looked at a set last year for my 89 Syncro Westy.  The bolt pattern
is the same as our vans 5x112 mm but the center hole is smaller than
our vanagon hubs.  On my Syncro I needed to take them to a shop to
hone out 3 or 4 mm diameter from each wheel, althought the rear fit
OK.  The rear drums have 2 bolts that will have to be removed to get
the rims to fit snug.  - I did not get them after trying to find a
metal shop that could do the modification - None in Rochester NY. So
look around for a shop that can do this work first.

Now the other question is the offset from center.  I do not know if
these wheels that you are looking at will fit and with which tires.
There is a code to measure the offset from equidistance from the
inner rim to the outer rim in relation to the center of the hub.  So
depending on where or how much off center the wheels are you may need
a spacer for you van.  On the 14" VW mags that measurement is "ET30".
 Don't know what the "ET" stands for but I'm sure someone on the list
knows.

Hope this helps,  Good luck,

Joel
89 Syncro Westy 14"
Rochester NY.

--- Kurt Stewart <kstewart@COPIQUIK.COM> wrote:
> I was going to buy a spare set of rims for my Vanagon, to put snows
> on. Does anyone know if a set of 1998 vw steel wheels would fit
> with no alteration? They are 15 inch rims.
>
> Kurt

__________________________________________________
Do You Yahoo!?
Buy the perfect holiday gifts at Yahoo! Shopping.
http://shopping.yahoo.com