Skip to main content
Gerry | Vanagon
Checking account...
← vanagon.com home · Continue the discussion in the forum
Subject:Re: Did I adjust my valves/lifters right?
From:Stan Wilder
Date:Mon, 10 Dec 2001 08:30:04 -0600

Question: Where is all the dissagreement with the 2 full turns coming
from???
Reply: Go to the archives and read for about four hours.

Stan Wilder

On Mon, 10 Dec 2001 09:10:30 EST Steven Denis <NotaJeep@AOL.COM> writes:
> In a message dated 12/10/01 8:47:05 AM Eastern Standard Time,
> wilden1@JUNO.COM writes:
>
> << I'm getting good
>  performance and the lifters quieten almost immediately after
> starting. >>
>  Exactly... IF you adjust them two turns in they NEVER make noise.
> the TPI of the adjustment screw working though the rocker arm ration
> puts the
> lifter EXACTLY in the center of it's travel..where it is DESIGNED to
> be..
> Where is all the dissagreement with the 2 full turns coming from???
>
> steve
>
> "Hey! nice Jeep, Mister! "
> "Look kid, it's NOTAJEEP! "
>
________________________________________________________________
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today!  For your FREE software, visit:
http://dl.www.juno.com/get/web/.