Yes, this method works pretty good, even with just one person. I open
the sliding door and use the sliding door handle to hold the funnel.
That gear oil drains slowly and holding the funnel gets old. Shove the
tubing into the tranny and tie it to something nearby to keep it in
place. Then thread it up trough the door handle, trim it to length, and
put the funnel on the end.

Mark

Matthew Pollard wrote:
>
> No pump needed. get 4'' of tygon tubing (clear tubing) about 5/8" od. jamm
> a funnel on one end. Make sure it is on tight- tape?  Snake the hose from
> the 1 o'clock position of the rear passanger wheel to the fill hole.
> Start dumping in the redline. You may be able to go with less that 4' of
> hose; i think i may have used closer to 3'. Have one person holding the
> hose in the tranny and one person holding the funnel and dumping in
> redline. Enjoy!
> matthew
>