>  I recently got a quote from a place called Europarts here in San
> Diego for $125.00 each side for 'rebuilt units', on an exchange basis. So,
> two (2) would be needed. These are complete assemblies so that
> one need not deal with that black (alemite?) grease s--t. Just replace as
a unit
> Apparently what they do is take the old ones, disassemble and place the
> 'cage' in a CNC machine to re-nachine & increase the bearing cage orifice,
> then installing the slightly larger bearings for assembly.

For about 20% cheaper, ($104 with listmember discount), I have brand NEW
German Lobro CV's complete with German boot kits, grease, and hardware - in
other words, everything you need, brand new OEM, not rebuilt.  This means
you'll have to bolt on the CV's yourself (a simple but messy job), versus
buying the rebuilt units that are already bolted to a used axle shaft.  But
you'll have new name-brand German CV's for _less_ than the price of the
rebuilt ones (and without the hassle of a core deposit or exchange).

- Ron Salmon
  The Bus Depot, Inc.
  (215) 234-VWVW
  www.busdepot.com

_____________________________________________
Toll-Free for Orders by Part #    1-866-BUS-DEPOT